Flexibility of metal hose

Metal hose is mainly composed of bellows, braided mesh sleeve and joint. The bellows plays the role of flexibility in the metal hose, which is made of thin-walled stainless steel with spiral or ring waveform. Woven metal wire or metal belt woven in a certain order, mounted on the outer surface of the metal bellows, has a strengthening role. The structural form of the joint is broadly divided into three categories: spiral, flange and quick type. Some of the metal hoses use oil, housing water, one of its purposes is to reduce its temperature. When the effect is not good, the temperature is increased, the metal hose exhaust volume will be reduced. Operating temperature refers to the metal hose work in the ambient temperature, if the use of the temperature of the environment is relatively high, should do a good job of the corresponding cooling measures, while using a large viscosity, high sun point lubricants; low ambient temperature, there will be no bad effects.
 
The flexible hose between the metal hose is smaller and has a smaller radius. Metal hose has better expansion and contraction, will not block or stiffen. Metal hose unit weight is light, good caliber. Metal hose is flexible, repetitive and bendable. Metal hose is corrosion resistant and high temperature resistant. Metal hose prevents mouse bite and abrasion to prevent internal wires from being worn. Metal hose is resistant to bending, stretching and side pressure. Metal hose is soft and smooth, easy to install and position. There are many hose fittings with metal hoses for easy connection with instruments and equipment.