Installation and Use of Rubber Joint Resistant Acid and Alkali
Rubber joint resistant acid and alkali is used as the function of hollow rubber products of flexible connection to metal pipes. According to the connection method, rubber joint is divided into three kinds: loose tube flange connection one, fixed flange one and screw one; According to the structure can be divided into single ball, double ball, reducing body, curved sphere and wind pressure coil. Rubber joint can reduce vibration and noise, and can meet the compensation caused by heat bilges and cold shrink effect, widely used in all kinds of pipe system.
Installation and Use of Rubber Joint Resistant Acid and Alkali
Following is detailed instruction about rubber joint resistant acid and alkali.
1.Appropriate model of rubber joint resistant acid and alkali must be chosen according to the working pressure, connection method, medium and the amount of compensation, and the number of rubber joint should be selected according to the requirement of displacement and noise reduction.
2.When instantaneous pressure of pipe is greater than working pressure, the rubber joints that pressure is higher than working pressure should be chosen.
3.Normal applicable medium of rubber joint is normal water temperature from 0 to 60 ℃. Under the circumstance of special medium, such as oil, acid and alkali, high temperature and corrosion resistance and other hard cases, corresponding resistant materials of rubber joints should be chosen, do not blindly use.
4.Using or storage of rubber joint should avoid high temperature, ozone, oil, acid and alkali environment.
