Precautions for the use of bendable rubber soft joints

Flexible rubber soft joint position sealing is not tight to produce leakage, rotating cover foot bolt travel arrangement disparity leads to rotating cover deflection, uneven bearing force; positioning bolt nut direction is wrong, can not reach the actual effect of expansion type or positioning. The expansion and deformation of bendable rubber soft joint depends partly on the packing and sealing of the rotating cover. Due to this structural feature, if no attention is paid to the equipment, adjustment and standardization of the actual operation in the application process, leakage can easily occur. The expansion and contraction position is also at a weak stage, which can cause pull-off damage. From the actual situation of the project, in the application of equipment to focus on the following aspects: first of all, to ensure the quality of the sealing ring, used, has no deformation capacity and damage can not be used, either in the leak and then adjust the foot bolt.
In the case of assembling bendable rubber soft joints, the first thing the guys should confirm the relevant model specifications, some people in this place if you do not pay attention to, often experience especially careless, assembled only after the incorrect occurred, then in such cases, must confirm the relevant bendable rubber soft joint pipe model specifications, at the same time also need to be based on the specific situation to do a good grasp In the course of assembling bendable rubber joints, you need to pay attention to the key points, so that in many cases it is likely that this area will produce a series of problems from time to time.
 
Bendable rubber joint in the course of assembly, most or a lot of other problems, for example, is likely to be the problem of the foot bolt, in the course of assembly, if you want to carry out a reasonable and effective connection, that will certainly apply to the corresponding foot bolt, and to find the foot bolt all to have a strict specification, most from the same manufacturer, or the same model Specifications, only then can carry out a reasonable and effective assembly.