What are the benefits of pressure 10kg rubber flexible joints?

Rubber joint is an elastic element composed of natural rubber and nitrile rubber. It has two outstanding advantages: high energy absorption; pressure resistance and aging resistance. It is suitable for various pressure, temperature and corrosive environments. It can reduce the friction between pipes; and can effectively compensate the axial displacement and reduce the axial expansion amplitude. Buna-N has the characteristics of heat resistance, wear resistance, oil resistance, and can be buried construction. So let's see about this product we all know?
It has good shock absorption, vibration damping and compensation displacement function; it can withstand larger axial pressure, axial displacement, axial displacement and axial displacement can be selected according to the need of different models, which can effectively compensate the axial displacement of the pipeline; it can also be used under high temperature, has good aging resistance, and can prevent the destruction of ozone, ultraviolet light and photochemical substances. Buna-N rubber joints are mainly used for steam, water, gas, oxygen, chlorine, ethanol and various acids, alkalis, salts and other corrosive media, as well as high or low temperature and other heat exchange media, and have good shock absorption, noise reduction and compensation deformation capabilities. Buna-N rubber joint is installed in the pipeline and connected to the pipeline through the metal flange on the joint, which plays the role of compensating displacement, preventing pipeline vibration and preventing pipelines from twisting and deflecting each other. Usually, it is a kind of compensation joint installed on the pipeline, mainly used for conveying water or gas, liquid and solid.
Rubber joints need to pay attention to the direction of connection with the pipeline during installation For a single rubber joint, it is usually installed on the pipeline. If it is not double flanged, the standard must be followed. When installing, pay attention to the installation direction of the pipeline and avoid tilting the pipeline. If installation is needed, the bolts and nuts connected to the pipe should be tightened first, and then the nuts should be fastened to the pipe to ensure that the rubber joint can be installed and operated smoothly. The usual pressures of rubber joints are, 1.0MPa, 1.6MPa, which are used a lot. of course, the working pressure of rubber joints includes but is not limited to these two, because it also has 0.25MPa, 0.6MPa, 1.0MPa, 1.6MPa, 2.5MPa. when the working pressure of rubber joints is 1.5MPa, the pressure of pipeline > 1.5MPa, then To choose the rubber joint with the working pressure of 2.5MPa. If the pressure of the rubber joint is less than the working pressure in the pipeline, the rubber joint will burst, tear and be damaged.