Stainless steel rubber soft joint selection considerations

Stainless steel rubber soft joint selection considerations
The selection of rubber flexible joints should take into account a good natural environment for its application. What unique conditions are used in the rubber soft joint must be selected heat-resistant, corrosion-resistant raw materials, so it is difficult to produce problems. If it is the general natural environment, the raw material regulations are not as high. Before the application, pick a good la goods, we just choose the right orientation for the future work. It is important to assemble the goods to be considered a successful manufacturing. 1 . In the construction and assembly process of installing and using the rubber flexible connection pipeline, make it in the state of accumulation, without human factors, so that the equipment is artificially deformed. That can prevent the initial destruction of the goods and the application of the efficacy of the weakened.
2 . If you assemble the design product in the near side of the entrance and exit of the centrifugal water pump or the corner position of the pipeline, and its Koran pressure, multi-storey building hanging in the air when applying the equipment, the pipeline has fixed immovable fixed bracket, otherwise the commodity should be installed to prevent pull off equipment.
3 . In the installation and use process, make the spherical lifting ring protruding part within the rigid wire rope all stuck into the flange groove body, in order to avoid the sphere and flange in the pipeline pressure off. On the ground bolts, first tighten the corresponding six or four ground bolts to ensure that all round balls are in the flange.
The relative height of the rubber soft connection is measured in accordance with the developed specification assembly length. Commodities in the factory generally choose the blind water pressure test at the moment specified to bear the pull for 1.5P (Mpa). Then the application boundary for the general skills plus point of bolts and nuts need to achieve this compromise level has a capacity of 30, so that the double protection can be reasonable desire line, which is also the scientific and reasonable basis for the matching support rod.