Installation and application scope of the fillet connection flexural rubber joint

Installation and application scope of the fillet connection flexural rubber joint
Installation instructions:
 
1 . The installation of rubber soft joint is strictly prohibited beyond the displacement limit.
2 . When the rubber joint is installed flat, suspended or vertically, the actual working axial displacement pressure of the rubber joint is less than the supporting force of the pipeline.
3 . The pipe must have fixed bracket or fixed bracket, and the force of the fixed bracket must be greater than the axial force.
4 . For vertical installation and overhead installation, corresponding fixed brackets and force-bearing brackets should be installed at both ends of the product to prevent pulling off after working under pressure.
5 . Keep away from heat source during installation, and forbid the use of media that do not meet the requirements of this product. Due to the good comprehensive performance of threaded rubber joints, they are mainly used for the lifting and conveying of raw water and sewage, feed water and cooling circulating water of thermal power plants, pipeline conveying of chemical substances in metallurgical industry, condensate water, chemical industry and petrochemical industry. Cooling, dilution and other industries long and short distance pipeline flexible connection. Since rubber has high abrasion resistance, it is also suitable for low-temperature conveying of particles, powders and gases in various industries.