What is Rubber Duckbill Check Valve
This valve is a special product ,and it is used for draining sewage .In many foreign countries,such as Spain , America,it is usually named as duckmouth-shaped valve .We are doing our best to make this valve more practical and more perfect . Rubber material duckbill check valve can be matched with steel pipe ,cement pipe .At the same time ,they may be widely used on the coast,seasands,reservoirs,and so on.In order to dispose the sewage or to dredge the floods.
Some elastomers can hand corrosive or abrasive fluids such as raw sewage, sludge or slurries. The operating temperature of the valve is limited by the elastomer temperature capacity.
The rubber is all rubber reinforced. It consists in an elastomer sleeve flattened in one end. The Duckbill valve can only be opened when the forward flow lifts the sealing flattened side of the sleeve that, otherwise its natural position is to be closed.
Rubber duckbill check valve features
1. Reliable backflow prevention
2. 100% elastomer construction eliminates maintenance
3. Will not corrode, warp or freeze open or shut
4. 1”-2” Cracking Pressure, Low Headloss
5. Curved Bill enhances sealing around debris
6. Custom built for each application based on pressure and flow conditions
7. Available in diameters from 1/2" (12mm) to 96” (2400mm)
