HuanZhong Rubber joints
Rubber joints for hose installation is only in pipes under pressure, not only undergoes rigorous tests in all, but as a protection device to protect the bellows, usually in monitoring the pressure in the pipe range, for this production, select one or more layers of stainless steel wire is braid. Generally rubber joint working pressure is divided in to 5 levels: 0.25, 0.6, 1.0, 1.6, 2.5Mpa
1. analysis of rubber connector damamge, internal wear and tear and corrosion rubber joints after running for some time, and joint pressure resistance ablity will decrease, media touched with stainless steel wire, in which chloride ions will have severe corrosion on stainless steel, corrosion thus weakening external stainless steel wrap, pipe pressure reaches a certain level, accidents happen
2. the outer of rubber joint, after bending torsion are Burr that metal twined stainless steel highlighted. Not only left a great sequela in the maintenance, serious surface damage,and the entire hose will rupture.
Rubber joints, as only under pressure in the hoses installed on the pipeline, not only undergoes rigorous tests in all, also as a protection device to protect the bellows, usually in monitoring the pressure in the pipe range, for this production, select one or more layers of stainless steel wire braid.
HuanZhong rubber joints using advanced production technology and equipment, the introduction of first-class technical developer according to customer's specific needs, wholeheartedly meet customer expectations of standards, and there are a lot of home sellers and agents, first-class after-sales service will relieve you of all worries.