Pressure of HuanZhong Rubber Joints
The rubber joints produced by Gongyi HuanZhong Pipeline Equipment Co.,Ltd plays a great emphasis on the working pressure, this is because the ball of it is vital for the rubber joint. In order to avoid the loss caused by clients for their improper installations and operations, HuanZhong products will mark a clear sign in packages. And you can also see the working pressure on the ball of rubber joint. Besides, you can see the thick of the flanges, if it is thin, the working pressure that it bears will be low, and vice verse.
The frequently used working pressures are 1.0MPa, 1.6MPa. Of course, there are many other working pressures, such as 0.25MPa, 0.6MPa, 1.0MPa, 1.6MPa, 2.5MPa, 4.0MPa, 6.4MPa. The last two working pressures are high working pressures, most factories cannot produce such a high pressure kinds of rubber joint. Being a professional rubber joint manufacturer, our company possesses a high production technology, rich experiences and a long history of manufacture, we can produce all kinds of high-pressure rubber joint and many other pipe fittings. The selection of rubber joint working pressure is based on the pressure of pumps and pipelines, it must be in accordance with the working pressure of pipeline and equipment, otherwise the rubber joint and the pipeline equipment will be destroyed.
Gongyi HuanZhong Pipeline Equipment Co.,Ltd specializes in all kinds of check valves, rubber joints, compensators and so on with good quality and complete after selling service.
