Three-piece design with flanged ends for fast installation, in-line maintenance and rebuilding. Working pressure includes CLASS 150, PN 16, PN 40, JIS 10K. Adjustable packing gland. Bottom-loaded blow-out proof stem. Valves with ISO 5211 mounting pad or direct actuator mounting pad are available.
Three-piece type flange ball valve generally uses rubber, nylon and PTFE as the sealing material, so its temperature depends on the sealing. Ball valve closing function worked through compressed between plastic seats under the effect of the media, valve seat is deformed under the pressure. The deformation can compensate the manufacturing presison of the sphere and the roughness of the surface to ensure good sealing performance.
Since the valve seat sealing ring is made of plastic, the fire resistance should be taken into consideration especially in petroleum, chemical, metallurgical and other departments, especially in flammable and explosive medium equipment and pipe fittings, should be paid more attension.
Three-piece type flange ball valve has good sealing performance, so it applies to slurry, abrasion, reduced chanel, rapid opening and closing movement, high pressure closure, low noise, the phenomenon of cavitation and gasification, small leakage to the atmosphere, small torque, small fluid resistance of the piping system.
In the low-temperature (cryogenic) equipment and piping system valve can also be used. In oxygen pipeline system of the metallurgical industry, need use the ball valve with strict treatment.
When regulating performance needed, special structure valve with V shaped opening should be used.
In the petroleum, petrochemical, chemical, electric power and urban construction, where the working temperature is over 200 in the pipeline system metal to metal sealing ball valve can be used.