The difference between the installation of threaded rubber joints and flange rubber joints

        The installation of rubber joints actually has different installation methods according to different models, which is mainly due to the difference of their shapes, but in general, their functions are similar, they are all for vibration and noise reduction, but the environment in which different models work will become different.
        Rubber joints can be divided into: KXT type bendable synthetic rubber soft joint, KST-F type bendable double sphere rubber soft joint, KST-L type bendable double sphere threaded rubber soft joint, KYT type elastic pipe shock absorber (reducer joint), FPT type fan coiler rubber soft joint, KWT type bendable synthetic rubber elbow.        1、Before installing the threaded rubber joint, put the two ends of the pipe fittings that need to be connected on the horizontal surface, screw the threaded rubber joint on one section of the pipe fittings first, then screw the other end of the pipe fittings, always keep it on the horizontal surface to prevent the rubber ball from being torn by uneven force during installation, then tighten the screws by hand or wrench, and fix the threaded rubber joint and the two ends of the pipe fittings on objects that are not easy to stretch or twist. The next step is to tighten the screws by hand or wrench and fix the threaded rubber joint and the two ends of the pipe fittings on objects that are not easily stretched or twisted.        2, flange rubber soft joints in the installation before the need to connect the two ends of the pipe fittings in the horizontal plane, the installation of the first fixed end of the pipe fittings flat, then let the flange on the rubber connector rotate so that the flange hole around the alignment, wear screws, screw on the nut, then make the other end of the pipe fittings flange and the flange on the rubber connector horizontal alignment, rotate the flange on the rubber connector, so that the flange mouth around the relative, wear screws and screw on the nut, the horizontal direction so that the three are closely connected to prevent poor sealing.