What are the principles of double-flange force transfer joints during installation.

1.If the position of the double flange force transfer joint has been set, all the bolts of the joint shall be removed and the joint shall be put into the position already left for reinstallation.
 
2.Take off the nuts at both ends of the flange and connect one end of the double flange force transfer joint with the disc valve or other flange.
 
3.After both flanges are evenly attached, the gland nut will be tightened diagonally for sealing gradually, do not press off.
 
4.The flow direction of the double-flange force transfer joint should be from the short pipe flange to the body flange end.
 
Double-flange force transfer joint is a new product for connecting pumps, valves and other equipment to pipelines. By connecting them with full bolts, they become a whole and have a certain displacement so that they can be adjusted according to the installation size on site during installation and maintenance, and can transmit axial thrust back to the whole pipeline during work. This not only improves the efficiency, but also protects the pump, valves and other equipment.