What should I pay attention to when installing the bendable rubber joints?
Installation precautions for bendable rubber joints
1. It is strictly forbidden to exceed the displacement and elongation of the rubber soft joint during installation. 2. The installation bolts should be symmetrical and gradually pressurized and torqued to prevent local leakage. 3.Above 10kg working pressure should be installed with elastic pressure pad to prevent the bolts from loosening when working. 4. When installing rubber joints vertically in a flat overhang, the actual working axial displacement pressure of rubber joints should be less than the supporting force of the pipeline, otherwise anti-pull-off devices should be installed to prevent the work from being pulled off under pressure. 5. The installation site of rubber joint should be far away from heat source, ozone area, rigorous strong radiation, exposure to sunlight and the use of media that do not meet the requirements of this product. 6. When transporting, loading and installing rubber joints, be sure to cut the sealing surface with sharp objects. 7. When installing the flange, please use the special flange for butterfly valve or small-diameter flange to avoid the phenomenon of flange falling off and sealing surface damage after installation. Bendable rubber soft joints are also called rubber soft joints, rubber joints, rubber shock absorbers, etc. It is widely used in fire fighting, chemical industry, pump and valve pipeline systems, etc. It plays the role of sound damping and absorbs the displacement generated by the operation of pipelines.
