What is the threaded rubber expansion joint installed on the pipe suitable for.

Hot water pipes can transport cold water, while cold water pipes are not recommended to transport hot water, why is this? , the need to meet both the water pipe flow and pressure-bearing needs. In order to meet the different flow needs, so there are 20mm, 25mm, 32mm and other outside diameter of the water pipe. In order to meet different pressure-bearing needs, there are different series of water pipes with the same nominal outer diameter.
But at huanzhong pipeline factory, we produce pipes that can convey both cold and hot water. The threaded rubber expansion joint installed on the pipeline is a highly elastic, airtight, media and weather resistant pipe joint, which is ideal for use in industries such as acid, alkali, corrosive classes, oil, hot water, cold water, compressed air and natural gas.
The threaded rubber joint utilizes the elasticity, high airtightness, media resistance, weather resistance and radiation resistance of rubber, which is compounded with high strength, cold and heat stable polyester cord fabric and vulcanized by high pressure and high temperature mold. It has high internal density, can withstand high pressure and good elastic deformation effect. Reduce vibration, reduce noise, good expansion and contraction, easy to use.
When installing the threaded rubber expansion joint, please pay attention to the need to connect the two ends of the pipe fittings on the horizontal plane, the installation needs to first screw the threaded structure in the lifting section of the pipe fittings, and then screw the other section of the pipe fittings, always keep in the horizontal plane, to prevent uneven force during the installation process and lead to tearing the rubber joint, the next hand or wrench to tighten the threads to the threaded rubber The next hand or wrench will tighten the threads to fix the threaded rubber joint and the two ends of the pipe on objects that are not easily stretched or twisted.