Thermal sleeve compensator is resistant to high temperature and corrosion

Because the thermal sleeve compensator has flexible lining, the pipe has good wear resistance, so it is suitable for use as a flue pipe, and its service life is twice as long as that of steel pipe. In coal ash 10%, if the pipe is turned by four times (the angle of turning is 90° each time), the service life of steel pipe is two years. Thermal sleeve compensator is mainly used in automobile industry, engineering machinery, lifting and transporting machinery for high pressure transportation and liquid transmission, with good oil resistance, heat resistance and aging resistance, high pressure bearing, excellent pulse performance, and can be used as a high pressure paint pipe.
 
Thermal sleeve compensator is suitable for medium engineering pressure ≤ 2.5MPa, medium temperature -40℃-600℃. Sliding surface by special treatment, in salt water, salt solution and other environments, good corrosion resistance, more than 50 times higher than austenitic stainless steel. At the same time, after many years due to wear and tear resulting in weakening the sealing effect, you can tighten the flange again to enhance the sealing performance, you can also loosen the bolt, take off the pressure ring, and then put in a layer or two layers of sealing ring, press the pressure ring, and continue to use.
 
The thermal sleeve compensator has no requirement for chloride ion content, especially suitable for the medium or the surrounding environment chloride ion exceeds the standard on the system. Thermal sleeve compensator is divided into one-way type and two-way type compensation structure. Bi-directional type is characterized by the sliding sleeve of the thermal sleeve compensator at both ends always sliding, regardless of the inflow of medium from the compensator, to achieve two-way compensation effect, the amount of compensation. Thermal sleeve compensator is suitable for hot water, steam, grease media.
 
Through the sliding sleeve to the outer sleeve of the sliding movement, to achieve the compensation of thermal expansion. Thermal sleeve compensator is suitable for pump inlet pipe pumping water or neutral liquid at room temperature, widely used in factories, mines, agriculture and engineering construction, etc. For agricultural drainage and irrigation, industrial and mining, civil construction, and water conservancy projects and other drainage and suction of room temperature water. The thermal sleeve compensator is made of special synthetic rubber, which has excellent oil resistance, heat resistance and aging resistance. Thermal sleeve compensator bearing pressure is high, pulse performance is superior, the body of the tube combined closely, the use of soft, small deformation under pressure.