How to properly install the buckle groove rubber soft joint?

How to properly install the buckle groove rubber soft joint?
For the use of rubber joints media: such as bendable rubber joints normal applicable media is the temperature 0-60 ° C ordinary water, special media such as: oil, acid and alkali, high temperature and other corrosive and hard texture of the case, should be selected corresponding to the special resistant material rubber joints, not blindly string with or general. When the pipeline displacement is greater than or equal to the compensation amount of the joint, the number of joints should be increased to parallel the displacement amount, and it is strictly forbidden to make the joint in the limit of flexural displacement and deviation in order to adjust the pipeline's super-difference, and not to exceed the limit (expansion, displacement, deflection, etc.) In high-altitude installation, it should be noted that: for high-rise water supply or suspended water supply, the pipeline should be fixed on the hanger, bracket or anchor frame, and the joint should not be allowed to bear the weight of the pipeline itself. and axial force, otherwise the joint should be equipped with an anti-pull-off device (its bearing force must be greater than the axial force of the pipe).
As with sealing industrial equipment in general, the application of grooved rubber joints should follow moderate guidelines as much as possible, especially when using energy-saving grooved rubber joints, and pay attention to some key factors and issues as much as possible throughout the installation process. Grooved rubber joints can reduce costs and are suitable for vehicles. Hydraulic. Hydroelectric power generation and engineering construction. The manufacturing and processing of industrial equipment not only features safe production, but also promotes the expansion of the application store of grooved rubber joints, effectively controlling the direct cost of a raw material commonly used in manufacturing. When importing grooved rubber soft joints, the following points should be noted at that time.
1 . During the installation process, keep the terrain and topography clear, especially to prevent dust from entering the installation mode. If hard plastic air pollutants enter, it can cause very serious harm to the surface of the grooved rubber flexible joints under operating conditions, thus reducing the overall service life of the goods. Damage to the surface raw materials will also enhance the internal corrosion by raw materials and other chemicals, which will cause more damage after a period of personal application.
2 . Before installation, the surface of the grooved rubber flexible joint should be removed and the installation method should be thoroughly addressed, especially the contact surface. Doing so must help to improve the grooved rubber flexible joints and seal the surface on the concrete works with more stable sealing expected effect. The other is that the surface of industrial equipment can be inspected and if there are small gaps and unevenness, they can be properly handled and maintained. Generally speaking, grooved rubber flexible joints can only stand out with a long service life if both surfaces are smooth, otherwise they can be easily damaged.