How to adjust the huanzhong straight pipe metal bellows compensator

How to adjust the huanzhong straight pipe metal bellows compensator
When the follower of straight pipe metal bellows compensator overload operation or the inner magnetic rotor is stuck due to holding the shaft, the active and follower of straight pipe metal bellows compensator will automatically fall off to protect the pipeline. When installed, a pair of straight pipe metal bellows compensator rotating direction, straight pipe metal bellows compensator helps the medium to clean and lubricate the rotor shaft, pay special attention to the straight pipe metal bellows compensator rotating direction to match.
 
Make the cooling medium flow more smoothly, can take away the heat generated by the vortex generated by the high-speed rotation of the straight pipe metal bellows compensator in time, so as to improve the cooling and lubricating effect of the straight pipe metal bellows compensator, pipe shaft and thrust ring, maintain the liquid film between the friction vice, and realize the liquid friction.
 
Cutting the impeller under the condition of keeping the efficiency basically unchanged can increase the gasification temperature of the medium by reducing the velocity energy of the liquid and increasing the static pressure energy; on the other hand, it can also reduce the introduction of external energy and avoid evaporation due to the increase of medium temperature. It also expands the operating range of straight pipe metal bellows compensator and reduces the influence of process fluctuation on the pipeline.