huanzhong bellows compensator is how to work

huanzhong bellows compensator is how to work
The magnetic coupling of the bellows compensator is cooled by the medium conveyed by the pump, if there are hard particles in the medium, it is easy to cause the isolation sleeve to scratch or cut through, and sometimes if the maintenance method is not proper, it may also cause damage to the isolation sleeve. After conveying easy crystallization or precipitation of the medium to be flushed in time, stop the pump and fill the pump cavity with clean water, and discharge clean after 1min operation to protect the service life of the bellows compensator.
Bellows compensator parts cleaning, plating cover and bonding parts cleaning standards are very high, cleaning quality is often the cause of plating or bonding failure, and parts assembly cleaning quality on the service life of machinery and equipment has a great impact, because the cleaning is seriously not up to standard, in the important friction vice seepage into a large amount of abrasive or because of debris blocking the lubricating oil channel and lead to early wear and accidental damage of machinery and equipment.
In some not enough professional repair work happens from time to time, must pay attention to. In the bellows compensator with organic sealing equipment, so as not to produce a large number of leaks, according to the leakage port to discharge a small amount of leakage, a small amount of leakage at the beginning of the start-up operation is normal, after a certain period of time in the seal surface operation, the leakage will be reduced or stopped.