(VSSJAFG(CF))Double flange force transfer joint Seller-Double Flange Dismantling Joint

Overview

Dismantling Joints Seller is designed to be the final closing piece in the pipe network,to ease the assembling and disassembling for later maintenance of a pump or valve.A standard adjusting range of 50mm on length and a small lateral and angular misalignment can be accommodated.This adjustability of the dismantling joint facilitates for easy removal of pumps and valves in circumstances of inspection,maintenance or replacement.

Dismantling Joints Seller is composed of body,sealingwasher,gland,short slides,this product is applicable for the pipeline which joints with flange on the both sides.Adjust the installation length to the flange on the both sides when installing, screw the bolts firmly one by one to make it as a whole with somewhat displacement. It is convenient to adjust on the spot when installs and maintains it later. This product can delivery axial power to the whole pipe when it is working.

Note:

1. The effectiveness of the Dismantling Joints Seller is achieved by arranging and installing them correctly .

2. The Expansion Joint must be set as close as possible to the soured of vibration to exclude the oscillation equipment .

3. An apogee installation of absorbers where the oscillation amplitude is acting laterally will help to the axis of vibrate direction at right angles.

Features

As a professional Dismantling Joints Seller our dismantling joints are used to angularly connect a drive shaft and a driven shaft, and to permit movement and tilt of the shaft axes.

More specifically, Dismantling Joints comprise a tubular coupling member with a hub angularly integral with the drive shaft; and a ring positioned radially outwards of the hub and angularly integral with the driven shaft.

More specifically, the joints may comprise a single coupling member, with the hub and ring connected directly to the drive shaft and driven shaft.

Alternatively, the joints may comprise a number of coupling members angularly integral with one another; in which case, the hub of one of the coupling members is connected to the drive shaft, and the hub of another of the coupling members is connected to the driven shaft.

Specification

No.	Name	Quantity	Material
1	Body	1	QT400-15、Q235A、ZG230-450、 20
2	Gasket	1	NBR
3	Follover	1	QT400-15、 Q235A、 ZG230-450、 20
4	Limited short pipe	1	Q234A、 20、 16Mn
5	bolt	5	Q235A、 35 、1Cr8Ni9Ti
6	nut	5n	Q235A 、20 、1Cr8Ni9Ti

Size Form

Nominal Diameter DN	External diameter of pipe Dw	Length		Flange connecting dimension
		Length		0.6Mpa				1.0Mpa
		l	l1	D	D1	n-Th	b	D	D1	n-Th	b
65	76	400	400	160	130	4-M12	16	185	145	4-M16	20
80	89			190	150	4-M16	18	200	160	8-M16	22
100	114			210	170	4-M16	18	220	180		24
125	140			240	200	8-M16	20	250	210		26
150	168			265	225		20	285	240	8-M20	26
200	219			320	280		22	340	295	8-M20	28
250	273			375	335	12-M16	24	395	350	12-M20
300	32S	420	50	440	395	12-M20	24	445	400	12-M20
350	377			490	445	12-M20	26	505	460	16-M20	30
400	426			540	495	12-M20	28	565	515	16-M24	323234
450	480			595	550	12-M20	28	615	565	20-M24	323234
500	530			645	600	20-M20	30	670	320	20-M24	36
600	630	440		755	705	20-M24	30	780	725	20-M27	38
700	720	440		860	810	24-M24	32	895	840	24-M27	40
800	820	600	60	975	920	24-M27	34	1015	950	24-M30	44
900	920			1075	1020	24-M27	36	1115	1050	28-M30	46
1000	1020			1175	1120	28-M27	36	1230	1160	28-M33	50
1200	1220	650		1405	1340	32-M30	40	1455	1380	32-M36	56
1400	1420	650		1630	1560	36-M33	44	1675	1590	36-M39	62
1600	1620	670		1830	1760	4-M33	48	1915	1820	40-M45	68
1800	1820	670		2045	1970	44-M36	50	2115	2020	44-M45	70
2000	2020	700		2265	2180	48-M39	54	2325	2230	48-M45	74
2200	2220	730		2475	2390	52-M39	60	2550	2440	52-M52	80
2400	2420	730		2685	2600	56-M39	62	2760	2650	56-M52	82
2600	2620	840	80	2905	2810	60-M45	64	2960	2850	60-M52	88
2800	2820			3115	3020	64-M45	68	3180	3070	64-M56	94
3000	3020			3315	3220	68-M45	70	3405	3290	68-M27	100
3200	3220			3525	3430	72-M45	76
Note：The size meets standard GB/T12465-2002 VSSJAFC(CC2F) Double Flange Dismantling Joints Seller：After installing on the pipe，sdjust to a telescopic distance and screw down the nuts .Then on the inflection of nuts ,seal and connect on the outer of pipe by a elastic sealing-washer ,connecting with the pipe valve is not only for the tube compensation ,but for the easy access in the event of repair or replacement..