How to strengthen the eccentric reducer rubber expansion joint?
Eccentric reducer rubber expansion joint main use: single ball flange end rubber soft joint cushioning structure, steel quality as well as characteristics for different, different elements composition and type in line with carbon: the greater the carbon content, the greater the hardness of the steel, but its plasticity and ductility is not good.
Eccentric reducer rubber expansion joint rubber soft joint can not only reduce vibration and noise, but also compensate for the thermal deformation and cold expansion caused by temperature changes, widely used in a variety of pipeline systems, from the surface, single ball rubber soft joint is a ball, double ball rubber soft joint by two balls constitute a soft double ball rubber soft joint cast molding information content, for the new project of pipe network engineering to give high quality rubber soft joint goods. Installed in the pipeline interface, it can digest and absorb the vibration and deflection of the pipeline, and assist in the continuous and stable operation of the pipeline system. It has been experimentally confirmed that the plastic connection is accompanied by the improvement of the quality of flexible joints. Rubber flexible joints can not only reduce vibration and noise, but also compensate for the thermal deformation and cold expansion caused by temperature changes. It is widely used in a variety of pipeline systems. From the surface, single-arch rubber flexible joint consists of one arch, double-arch rubber flexible joint consists of two arches, double-arch rubber flexible joint is reasonably laid out to provide professional rubber flexible joint goods for new projects of pipeline network engineering.
Eccentric reducer rubber expansion joint design certain structure, can reduce the seal failure due to water scaling: In many areas, due to poor water quality, high scaling index, coupled with no specific softening water treatment device, the ordinary machine seal in the dynamic ring auxiliary seal due to water scaling caused by the failure of many has become a big problem. Designing the bellows seal into external cooling or static structure can effectively prevent it from scaling. If the structure is not designed properly or applied properly, the bellows seal is also prone to scaling, leading to seal failure, so it is recommended to use the bellows with cooling water as the cooling water for water, so that the bellows seal working environment will be greatly improved to extend the service life. In the high temperature and impurities in the pump with ordinary mechanical seals, due to a variety of auxiliary seals and friction subgroup is often limited by the use of temperature to inject external flushing oil around the friction sub, to lubricate, reduce the seal cavity temperature to establish a suitable for the work of the parts of the adaptation environment, but due to the seal oil flushing caused a lot of waste of funds, choose the right amount of bellows seal can not play sealing oil Save a lot of money on oil sealing.
